Nissan Altima 2007-2012 Service Manual: Headlamp (halogen)

Wiring Diagram - Coupe

Wiring Diagram - Sedan

    Optical sensor
    Description The optical sensor converts the outside brightness (lux) to voltage and transmits the optical sensor signal to the BCM. Component Function Check 1.CHECK OPTICAL SENSOR SIGNAL BY CONS ...

    Headlamp (xenon)
    Wiring Diagram - Coupe Wiring Diagram - Sedan ...

    Other materials:

    P0222, P0223 TP sensor
    Description Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has two sensors. These sensors are a kind of potentiometers which transform the ...

    P0841 pressure sensor function
    Description Using the engine load (throttle position), the primary pulley revolution speed, and the secondary pulley revolution speed as input signal, TCM changes the operating pressure of the primary pulley and the secondary pulley and changes the groove width of the pulley to control the g ...

    B2609 steering status
    Description There are 2 switches in the electronic steering column lock (steering lock/unlock switch 1 and 2). BCM compares those two switches conditions to judge the present steering status. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2609 is displayed with DTC U1000, first perform th ...