Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

Preparation
Commercial Service Tool ...

Parking brake system
PEDAL TYPE Inspection • Check control device for wear or other damage. Replace if necessary. • Check wires for wear or damage. Replace if necessary. • Check warning lamp and switch. Rep ...

Other materials:

P0730 belt damage
Description TCM selects the gear ratio using the engine load (throttle position), the primary pulley revolution speed, and the secondary pulley revolution speed as input signal. Then it changes the operating pressure of the primary pulley and the secondary pulley and changes the groove width ...

Audio antenna (sedan)
Location of Antenna 1. In-line connectors M87, M501 2. Audio unit harness 3. Audio unit 4. Satellite antenna 5. Audio antenna feeder 6. Satellite radio antenna feeder 7. Window Antenna 8. Antenna amp. 9. Satellite radio tuner Window Antenna Repair ELEMENT CHECK 1. Attach probe circuit ...

Electronic controlled engine mount
System Diagram System Description INPUT/OUTPUT SIGNAL CHART *: This signal is sent to the ECM via the CAN communication line. SYSTEM DESCRIPTION The ECM controls the engine mount operation corresponding to the engine speed. The control system has a 2-step control [Soft/Hard] ELECTRON ...