Nissan Altima 2007-2012 Service Manual: Power window retained power operation does not operate properly

Diagnosis Procedure

1. CHECK DOOR SWITCH

Check door switch.

Refer to PWC-212, "Component Function Check".

Is the inspection result normal? YES >> Inspection End.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Auto operation does not operate but manual operates normally (passenger side)
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement&qu ...

    Does not operate by key cylinder switch
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement&qu ...

    Other materials:

    B2602 shift position
    Description BCM confirms the shift position with the following 2 signals. • CVT selector lever • Speed signal from meter DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-235, "DTC L ...

    If your vehicle overheats
    If your vehicle is overheating (indicated by an extremely high temperature gauge reading), or if you feel a lack of engine power, detect abnormal noise, etc. take the following steps. WARNING ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a v ...

    Service data and specifications (SDS)
    Standard and Limit GENERAL SPECIFICATIONS DRIVE BELTS CYLINDER HEAD * Approximately 80°C (176°F) Available Valve Lifter Valve Spring CAMSHAFT AND CAMSHAFT BEARING CYLINDER BLOCK PISTON, PISTON RING, AND PISTON PIN Available Piston Piston Ring CONNECT ...