Nissan Altima Owners Manual: Receiving a call

When a call is placed to the connected phone, the display will change to phone mode.

To accept the incoming call, either:

● Press the steeringbutton on the
steering wheel, or
● Touch the icon on the screen.

To reject the incoming call, either: ● Press the wheel, or button on the steering
wheel, or
● Touch the red phone icon on the screen.

    Making a call
    To make a call, follow the procedure below: 1. Press the   button on the control panel. The “Phone” screen will appear on the display. 2. Select one of the following options to make a ...

    During a call
    While a call is active, the following options are available on the screen: ● “Handset” Select this option to switch control of the phone call over to the handset. ● “Mute Mic. ...

    Other materials:

    Engine coolant temperature gauge
    System Diagram System Description The engine coolant temperature gauge indicates the engine coolant temperature. The ECM provides an engine coolant temperature signal to the combination meter via CAN communication lines. Component Parts Location 1. Combination meter M24 2. IPDM ...

    Accelerator pedal released position learning
    Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor ...

    B2603 shift position status
    Description BCM confirms the shift position with the following 2 signals. • CVT selector lever • P/N position switch DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2603 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-235, "DTC Logic ...