Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)

Bulb Specifications

* Always check with the Parts Department for the latest parts information.

    Illumination
    Removal and Installation TRUNK ROOM LAMP Removal 1. Disconnect the negative battery terminal. 2. Release the tab (A), then swing open the lens. 3. Remove the bulb (3). 4. Release the tab ( ...

    Other materials:

    Spark plug
    Removal and Installation 1. Ignition coil 2. Spark plug 3. Rocker cover REMOVAL 1. Remove the ignition coil. Refer to EM-35, "Removal and Installation". 2. Remove the spark plug with a suitable spark plug wrench. INSPECTION AFTER REMOVAL • Do not use a wire brush for clean ...

    P0043, P0044 HO2S3 heater
    Description SYSTEM DESCRIPTION The ECM performs ON/OFF control of the heated oxygen sensor 3 heater corresponding to the engine speed, amount of intake air and engine coolant temperature. OPERATION DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC C ...

    BCM (Body control module)
    Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH front window anti-pinch 4: With Intelligent Key 5: Without Intelligent Key Wiring Diagram-Sedan ...