Nissan Altima 2007-2012 Service Manual: Symptom diagnosis

IPDM E/R (Intelligent power distribution module engine room)
Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram — Coupe Fail Safe CAN COMMUNICATION CONTROL When CAN communication ...

Intelligent key system/engine start function symptoms
Symptom Table Engine cannot be started with all Intelligent Keys. CAUTION: • Follow Trouble Diagnosis Flowchart referring to “SEC-10, "Work Flow"”. Determine malfunctioning condi ...

Other materials:

Trouble diagnosis - specification value
Description The specification (SP) value indicates the tolerance of the value that is displayed in “SPEC” of “DATA MONITOR” mode of CONSULT-III during normal operation of the Engine Control System. When the value in “SPEC” of “DATA MONITOR” mode is within the SP value, the En ...

Common item
 Diagnosis Description BCM CONSULT-III FUNCTION CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the following for all sub system ...

Malfunction indicator lamp
Description The Malfunction Indicator Lamp (MIL) is located on the combination meter. The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check. When the engine is started, the MIL should go off. If the MIL remains on, the on board diagno ...