Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance
- CVT Fluid
- Fluid cooler cleaning
- Stall test
- Line pressure test
- Road test
- CVT Position
- On-vehicle repair
- Control device
- Control cable
- Air breather hose
- Differential side oil seal
Preparation
Special Service Tool
The actual shapes of Kent-Moore tools may differ from those of special
service tools illustrated here.
Commercial Service Tool
...
CVT Fluid
Inspection
CHECKING CVT FLUID
Fluid level should be checked with the fluid warmed up to 50 to 80°C (122 to
176°F). The fluid level check procedure
is as follows:
1. Check for fluid leakage.
...
Other materials:
P0500 VSS
Description
The vehicle speed signal is sent to the combination meter from the “ABS
actuator and electric unit (control
unit)” by CAN communication line. The combination meter then sends a signal to
the ECM by CAN communication
line.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC P050 ...
Function diagnosis
M/T SYSTEM
System Diagram
CROSS-SECTIONAL VIEW
1. Transaxle case
2. 3rd input gear
3. 3rd-4th synchronizer hub
4. 3rd-4th coupling sleeve
5. 4th input gear
6. 5th input gear
7. 5th-6th synchronizer hub
8. 5th-6th coupling sleeve
9. 6th input gear
10. Input shaft rear bearing
11. Mains ...
ABS branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the ABS actuator and electric unit
(control unit) for damage, bend
and loose connection (unit ...
