Nissan Altima 2007-2012 Service Manual: A-BAG branch line circuit

Diagnosis Procedure

1.CHECK AIR BAG DIAGNOSIS SENSOR UNIT

Check the air bag diagnosis sensor unit. Refer to SRC-3, "Work Flow".

Is the inspection result normal? YES >> Replace the main harness.

NO >> Replace parts whose air bag system has a malfunction.

    ECM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and co ...

    BCM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors ...

    Other materials:

    Compression pressure
    On-Vehicle Service CHECKING COMPRESSION PRESSURE 1. Run the engine until it reaches normal operating temperature. 2. Turn the ignition switch to OFF. 3. Release fuel pressure and leave the fuel pump electrically disconnected. Refer to EC-1579, "Inspection". 4. Remove all six ...

    Power supply and ground circuit for front air control
    Description COMPONENT DESCRIPTION FRONT AIR CONTROL The front air control has a built-in microcomputer which processes information sent from various sensors needed for air conditioner operation. The air mix door motors, mode door motor, intake door motor, blower motor and compressor are then c ...

    Diagnosis and repair workflow
    Work Flow DETAILED FLOW 1.LISTEN TO CUSTOMER COMPLAINT Listen to customer complaint. Get detailed information about the conditions and environment when the symptom occurs. >> GO TO 2 2.VERIFY THE SYMPTOM WITH OPERATIONAL CHECK Verify the symptom with operational check. Refer to HAC- ...