Nissan Altima 2007-2012 Service Manual: Warning chime system

Disassembly and assembly
COMBINATION METER Disassembly and Assembly DISASSEMBLY 1. Remove the combination meter. Refer to IP-12, "Removal and Installation". 2. Remove the combination meter lens (1) from the co ...

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment un ...

Other materials:

P0506 ISC System
Description The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine ...

Front manual seat adjustment (if so equipped
Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the le ...

Key slot
Diagnosis Procedure 1.CHECK KEY SLOT POWER SUPPLY CIRCUI 1. Turn ignition switch OFF. 2. Disconnect key slot connector. 3. Check voltage between slot connector and ground. Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace key slot power supply circuit ...