Nissan Altima 2007-2012 Service Manual: Transaxle & transmission 6MT: RS6F52A
- Function diagnosis
- Symptom diagnosis
- Precaution
- Preparation
- On-vehicle maintenance
- On-vehicle repair
- Removal and installation
- Disassembly and assembly
- Transaxle assembly
- Input shaft and gear
- Mainshaft AND Gear
- Reverse idler shaft and gear
- Final drive
- Shift fork and fork rod
- Service data and specifications (SDS)
Service data and specifications
(SDS)
Clutch Control System
Clutch Pedal
Clutch Disc
Clutch Cover
...
Function diagnosis
M/T SYSTEM
System Diagram
CROSS-SECTIONAL VIEW
1. Transaxle case
2. 3rd input gear
3. 3rd-4th synchronizer hub
4. 3rd-4th coupling sleeve
5. 4th input gear
6. 5th input gear
7. 5th-6th sync ...
Other materials:
Steering switch (sedan)
Description
When one of the steering wheel audio control switches is pushed, the
resistance in steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
WITH BLUETOOTH
1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connect ...
B2602 shift position
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• Speed signal from meter
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-36, "DTC Lo ...
P0507 ISC System
Description
The ECM controls the engine idle speed to a specified level through the fine
adjustment of the air, which is let
into the intake manifold, by operating the electric throttle control actuator.
The operating of the throttle valve is
varied to allow for optimum control of the engine ...