Nissan Altima 2007-2012 Service Manual: Body repair coupe
Rear spoiler
Removal and Installation
1. Rear spoiler assembly
2. High mounted stop lamp harness
3. Gasket
A. Nuts
Removal
1. Remove trunk lid finisher (if equipped). Refer to INT-23, "Removal and
...
Features of new model
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
M= Metallic, S= Solid, 2S= Solid and Clear, 2P= 2-stage Pearl, 3P= 3-Stage
pearl, PM=Pearl metallic, Black is solvent based, all others
are ...
Other materials:
Control device
Exploded View
1. Control lever knob
2. Lock pin
3. Knob cover
4. Control device selector plate
5. Control device assembly
Removal and Installation
REMOVAL
1. Remove the center console assembly. Refer to IP-18, "Disassembly and
Assembly".
2. Disconnect the control cable from ...
Malfunction indicator lamp
Description
The Malfunction Indicator Lamp (MIL) is located on the combination
meter.
The MIL will light up when the ignition switch is turned ON without
the engine running. This is a bulb check.
When the engine is started, the MIL should go off. If the MIL remains
on, the on board diagno ...
Front fog lamp circuit
Description
The IPDM E/R (intelligent power distribution module engine room) controls the
front fog lamp relay based on
inputs from the BCM over the CAN communication lines. When the front fog lamp
relay is energized, power
flows from the front fog lamp relay in the IPDM E/R to the front fog ...