Nissan Altima 2007-2012 Service Manual: Rear axle

Service data and specifications (SDS)
Wheel Bearing Drive Shaft Dynamic Damper Boot Bands ...

Symptom diagnosis
NOISE, VIBRATION, AND HARSHNESS( NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts. Г ...

Other materials:

P0643 Sensor power supply
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition switch ON. ...

P2118 throttle control motor
Description The throttle control motor is operated by the ECM and it opens and closes the throttle valve. The current opening angle of the throttle valve is detected by the throttle position sensor and it provides feedback to the ECM to control the throttle control motor to make the thrott ...

Idle air volume learning
 Description Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps engine idle speed within the specific range. It must be performed under the following conditions: • Each time the electric throttle control actuator or ECM is replaced. • Idle s ...