Nissan Altima 2007-2012 Service Manual: Lan system can system (type 1)

COMPONENT DIAGNOSIS

Can communication circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect all the unit connect ...

Main line between dlc and abs circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and co ...

Other materials:

Rear bumper
Removal and Installation 1. Rear bumper supports 2. Rear bumper reinforcement 3. Energy absorbing foam 4. Splash shield LH 5. Rear bumper fascia 6. Splash shield RH REMOVAL 1. Remove the LH and RH rear combination lamps. Refer to EXL-260, "Removal and Installation". 2. Rem ...

Side guard molding
Removal and Installation 1. Double-faced adhesive tape Removal CAUTION: Never apply tack-paper adhesive remover to body panel surface finished with lacquer-based paints. • Original side guard molding is affixed to body panel with double-faced adhesive tape. 1. Heat molding to betwe ...

Air breather hose
Exploded View 1. Air breather hose 2. Clip 3. Bracket 4. Air breather tube 5. CVT assembly A. Paint mark Removal and Installation Refer to the figure for removal and installation. CAUTION: • Install air breather hose with paint mark facing upward. • Insert air breather hose a m ...