Nissan Altima 2007-2012 Service Manual: Steering control system

Service data and specifications (SDS)
Steering Wheel Steering Angle Steering Column STEERING COLUMN LENGTH TILT MECHANISM OPERATING RANGE Steering Gear STEERING OUTER SOCKET AND INNER SOCKET RACK STROKE Oil Pump S ...

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow DETAILED FLOW 1.COLLECT THE INFORMATION FROM THE CUSTOMER It is also important to clarify customer complaints before inspection. First of all, reproduce s ...

Other materials:

IPDM E/R (Intelligent power distribution module engine room)
Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram — Coupe Wiring Diagram — Sedan Fail Safe CAN COMMUNICATION CONTROL When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-sa ...

Line pressure test
Inspection and Judgment INSPECTION Line Pressure Test Port (A) Line Pressure Test Procedure 1. Inspect the amount of engine oil and replenish if necessary. 2. Drive the car for about 10 minutes to warm it up so that the CVT fluid reaches in the range of 50 to 80°C (122 to 176°F), then ...

Evaporative emission system
System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: ECM determines the start signal status by the signals of engine speed and battery voltage. *2: This signal is sent to the ECM via the CAN communication line. SYSTEM DESCRIPTION The evaporative emission system is used to ...