Nissan Altima 2007-2012 Service Manual: Power supply, ground & circuit elements sedan

Other materials:

In-vehicle sensor
Removal and Installation REMOVAL 1. Remove the instrument lower cover LH. Refer to IP-12, "Removal and Installation". 2. Remove the in-vehicle sensor screw and remove the in-vehicle sensor. INSTALLATION Installation is in the reverse order of removal. • Make sure that the ...

Radiator
Removal and Installation 1. Radiator 2. CVT oil cooler hose (if equipped) 3. Radiator hose (upper) 4. Radiator hose (lower) 5. Cooling fan 6. Reservoir tank 7. Reservoir hose 8. Radiator filler cap 9. Clamps A. To CVT (if equipped) B. To water outlet C. To water inlet WARNING: Never ...

P0443 Evap canister purge volume control solenoid valve
Description The EVAP canister purge volume control solenoid valve is used to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor th ...