Other materials:

Ignition timing
Description This describes how to check the ignition timing. For the actual procedure, follow the instructions in “BASIC INSPECTION”. IGNITION TIMING : Special Repair Requirement 1.CHECK IGNITION TIMING 1. Attach timing light to No. 1 igniton coil (1) wire as shown. 2. Check ignitio ...

On board refueling vapor recovery (ORVR)
Description From the beginning of refueling, the air and vapor inside the fuel tank go through refueling EVAP vapor cut valve and EVAP/ORVR line to the EVAP canister. The vapor is absorbed by the EVAP canister and the air is released to the atmosphere. When the refueling has reached the ...

S Terminal circuit
Description The output voltage of the generator is controlled by the IC regulator at terminal “3” (S) detecting the input voltage. Terminal “3” circuit detects the battery voltage to adjust the generator output voltage with the IC regulator. Diagnosis Procedure 1.CHECK VOLTAGE REG ...