Nissan Altima 2007-2012 Service Manual: Audio unit

Removal and Installation

REMOVAL

1. Remove the cluster lid D. Refer to IP-12, "Removal and Installation".

2. Remove the cluster lid D screws (A), then remove the audio unit screws (B) and the audio unit (1).

INSTALLATION

Installation is in the reverse order of removal.

    On-vehicle repair
    ...

    Front tweeter
    Removal and Installation REMOVAL 1. Remove the front pillar finisher. Refer to INT-15, "Removal and Installation" (coupe) and INT-36, "Removal and Installation" (sedan). 2. ...

    Other materials:

    Power steering oil pump
    QR25DE : Disassembly and Assembly The power steering oil pump and pulley is not serviceable and should be replaced as an assembly. For front and rear bracket removal, refer to ST-19, "QR25DE : Removal and Installation". VQ35DE : Disassembly and Assembly The power steering oil pump an ...

    On-vehicle maintenance
    REAR SUSPENSION ASSEMBLY On-vehicle Service • Check the suspension parts for excessive play, cracks, wear or damage. Shake each rear wheel to check for excessive play. • Retighten all nuts and bolts to the specified torque. • Make sure that the cotter pin is installed. • Check ...

    B2109 steering lock relay
    Description The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication. IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2109 is displayed with DTC U1000, first perf ...