Nissan Altima 2007-2012 Service Manual: Basic inspection
Diagnosis and repair work flow
Work Flow
OVERALL SEQUENCE
*1 SRC-12, "Trouble Diagnosis Introduction"
Introduction"
*2 SRC-12, "SRS Operation Check"
*3 SRC-5, "Trouble Diagnosis with
CONSULT-II ...
Other materials:
Steering gear and linkage
Exploded View
1. Outer socket
2. Boot clamp
3. Boot
4. Inner socket
5. Boot clamp
6. SSPS valve (part of gear assembly)
7. Gear assembly
Disassembly
1. Remove outer socket locknut and outer socket
2. Remove boot clamps and boot.
3. Remove inner socket.
Inspection
INSPECTION AFT ...
The oil pressure warning lamp does not turn on
Description
The oil pressure warning lamp stays off when the ignition switch is turned
ON.
Diagnosis Procedure
1.CHECK OIL PRESSURE WARNING LAMP
Perform IPDM E/R auto active test. Refer to PCS-14, "Diagnosis Description".
Is oil pressure warning lamp illuminated?
YES >> G ...
ABS branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the ABS actuator and electric unit
(control unit) for damage, bend
and loose connection (unit ...