Nissan Altima 2007-2012 Service Manual: BCM (Body control module)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Terminal Layout
Physical Values
1: Sedan only
2: With LH front window anti-pinch
3: With LH and RH front window anti-pinch
4: With Intelligent Key
5: Without Intelligent Key
Ecu diagnosis
...
Wiring Diagram - Intelligent key system/
engine start function
Wiring Diagram - VEHICLE SECURITY SYSTEM
Wiring Diagram - NVIS
Fail Safe
DTC Inspection Priority Chart
If some DTCs are d ...
Other materials:
B260F engine status
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-235, "DTC Logic".
• If DTC B260F is displayed w ...
Oil cooler
Removal and Installation
1. Oil filter
2. Oil cooler bolt
3. Water pipe
4. Water hose
5. Oil cooler
6. O-ring
7. Oil pan
8. Water pipe
9. Relief valve
10. Water drain plug
11. Copper gasket
12. Water connector
WARNING:
Be careful not to get burned, engine coolant and engine oil may ...
Front timing chain case
Removal and Installation
1. Gasket
2. IVT control valve cover RH
3. IVT valve RH
4. IVT valve LH
5. Water pump cover
6. IVT control valve cover LH
7. Crankshaft pulley
8. Front oil seal
9. Front timing chain case
A. Follow installation procedure
NOTE:
• This section describes procedu ...