Nissan Altima 2007-2012 Service Manual: Body repair sedan

Replacement operations
Description This section is prepared for technicians who have attained a high level of skill and experience in repairing collision- damaged vehicles and also use modern service tools and equipment ...

Features of new model
BODY EXTERIOR PAINT COLOR Body Exterior Paint Color M = Metallic, S = Solid, 2S = Solid and Clear, 2P = 2-stage Pearl, 3P = 3-Stage pearl, PM = Pearl metallic, Black is solvent based, all othe ...

Other materials:

B2601 shift position
Description BCM confirms the shift position with the following 2 signals. • CVT selector lever • P position signal from IPDM E/R (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-4 ...

B2190, P1610 nats antenna AMP
Description Performs ID verification through BCM and Intelligent Key when push-button ignition switch is pressed. Prohibits the release of steering lock or start of engine when an unregistered ID of Intelligent Key is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PE ...

Side guard molding
Removal and Installation 1. Double-faced adhesive tape Removal CAUTION: Never apply tack-paper adhesive remover to body panel surface finished with lacquer-based paints. • Original side guard molding is affixed to body panel with double-faced adhesive tape. 1. Heat molding to betwe ...