Nissan Altima Owners Manual: Brake system

The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at 2 wheels.

Power steering
WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering w ...

Brake precautions
Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the bra ...

Other materials:

Front drive shaft
Removal and Installation (Left Side) 1. Drive shaft 2. Cotter pin REMOVAL 1. Remove wheel and tire. Refer to WT-66, "Adjustment". 2. Remove wheel sensor from steering knuckle. Refer to BRC-63, "Removal and Installation" (ABS), BRC- 134, "Removal and Installation& ...

B2609 steering status
Description There are 2 switches in the electronic steering column lock (steering lock/unlock switch 1 and 2). BCM compares those two switches conditions to judge the present steering status. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2609 is displayed with DTC U1000, first perform ...

TPMS
System Diagram System Description BODY CONTROL MODULE (BCM) The BCM is shown with the instrument panel LH removed. The BCM reads the air pressure signal received by the tire pressure receiver, and controls the low tire pressure warning lamp as shown below. It also has a self-diagnosis funct ...