Nissan Altima Owners Manual: Camera unit maintenance
The rear camera unit 1 for the LDW/BSW systems is located above the rear licence plate. To maintain the proper operation of the LDW/BSW systems and help keep the system functioning, be sure to observe the following:
● Always keep the camera unit clean.
● Do not attach “licence plate accessories” that reflect light.
● Do not strike or damage the areas around the camera unit.
BSW/LDW automatic deactivation
When dirt, rain or snow cannot be removed by
the automatic washer and blower and accumulates
on the camera, making it impossible to
detect the vehicles or the lane markers, the BSW
and/or LDW syst ...
Other materials:
Accelerator pedal released position
learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn
the fully released position of the
accelerator pedal by monitoring the accelerator pedal position sensor output
signal. It must be performed each
time harness connector of accelerator pedal position sensor ...
B210F PNP/Clutch interlock switch
Description
IPDM E/R confirms the shift position with the following signals.
• Park/neutral position (PNP) switch
• Shift position signal from BCM (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000 ...
Cooling fan control
System Diagram
System Description
INPUT/OUTPUT SIGNAL CHART
*1: The ECM determines the start signal status by the signals of engine speed
and battery voltage.
*2: This signal is sent to ECM through CAN communication line.
SYSTEM DESCRIPTION
ECM controls cooling fan speed correspondin ...