Nissan Altima 2007-2012 Service Manual: Common item

 Diagnosis Description

BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE: It can perform the diagnosis modes except the following for all sub system selection items.

CONSULT-III Function

ECU IDENTIFICATION

Displays the BCM part No.

SELF-DIAG RESULT

Refer to PWC-79, "DTC Index".

    Retained PWR
    CONSULT-III Function (BCM - RETAINED PWR) Data monitor ...

    Other materials:

    Parking lamp circuit
    Description The IPDM E/R (intelligent power distribution module engine room) controls the tail lamp relay based on inputs from the BCM over the CAN communication lines. When the tail lamp relay is energized, power flows through fuses 46 and 47, located in the IPDM E/R. Power then flows to th ...

    Cylinder block
    Disassembly and Assembly 1. Cylinder block 2. O-ring 3. Crankshaft position sensor (POS) 4. Knock sensor 5. Cylinder block heater (if equipped) 6. Lower cylinder block 7. Lower cylinder block bolt 8. Snap ring 9. Connecting rod 10. Connecting rod bearing 11. Connecting rod bearing cap ...

    CD changer
    Diagnosis Procedure 1.CHECK FUSE Check that the following fuses of the CD changer are not blown. Are the fuses OK? YES >> GO TO 2 NO >> Be sure to eliminate cause of malfunction before installing new fuse. 2.CHECK POWER SUPPLY CIRCUIT Check voltage between CD changer harness con ...