Nissan Altima 2007-2012 Service Manual: Component diagnosis

Function diagnosis
STARTING SYSTEM System Diagram System Description The starter motor plunger closes and provides a closed circuit between the battery and the starter motor. The starter motor is grounded to the ...

B terminal circuit
Description The “B” terminal is constantly supplied with battery power. Diagnosis Procedure CAUTION: Perform diagnosis under the condition that the engine cannot start by the following proce ...

Other materials:

P0132 A/F sensor 1
Description The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement = 1, but also in the lean and ...

P0441 evap control system
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0441 is displayed with other DTC such as P2122, P2123, P2127, P2128 or P2138, first perform trouble diagnosis for other DTC. In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. Purge vo ...

Drive belts
 Checking Drive Belts WARNING: Inspect the drive belt only when the engine is stopped. NOTE: On vehicles not equipped with A/C, there is an idler pulley in the position for the drive belt routing. • Make sure that the stamp mark of drive belt auto-tensioner is within the usable ...