Nissan Altima 2007-2012 Service Manual: Does not stop fully-open or fullyclosed position

Diagnosis Procedure

1. PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure.

Refer to RF-6, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement".

Is the inspection result normal? >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Auto operation does not operate
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to RF-6, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". ...

    Retained power operation does not operate properly
    Diagnosis Procedure 1.CHECK FRONT DOOR SWITCH Check front door switch. Refer to DLK-69, "Component Function Check". Is the inspection result normal? >> Check intermittent inc ...

    Other materials:

    P0507 ISC System
    Description The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine ...

    Door finisher
    Exploded View 1. Mirror cover 2. Front door finisher 3. Step lamp lens 4. Rear door finisher 5. Step lamp/reflector lens (if equipped) 6. Arm rest finisher 7. Rear door power window switch finisher 8. Inside release handle 9. Inside release handle escutcheon 9. Inside release handle esc ...

    Additional service when removing battery negative terminal
    Description Initial setting is necessary when battery terminal is removed. CAUTION: The following specified operations are not performed under the non-initialized condition. • Auto-up operation • Anti-pinch function • Retained power operation Special Repair Requirement INITIALIZ ...