Nissan Altima 2007-2012 Service Manual: ECU diagnosis

Door switch
Description Detects door open/close condition. Component Function Check 1.CHECK FUNCTION Check door switches DOOR SW-DR, DOOR SW-AS in Data Monitor mode with CONSULT-III. Is the inspection ...

BCM (Body control module)
Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH fr ...

Other materials:

Multiport fuel injection system
System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: This sensor is not used to control the engine system under normal conditions. *2: This signal is sent to the ECM via the CAN communication line. *3: ECM determines the start signal status by the signals of engine speed an ...

AV control unit
Diagnosis Procedure 1.CHECK FUSE Check that the following fuses of the AV control unit are not blown. Are the fuses OK? YES >> GO TO 2 NO >> Be sure to eliminate cause of malfunction before installing new fuse. 2.CHECK POWER SUPPLY CIRCUIT Check voltage between AV control unit ...

Off-road recovery
If the right side or left side wheels unintentionally leave the road surface, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and t ...