Nissan Altima 2007-2012 Service Manual: ECU diagnosis

Back-up lamp
Wiring Diagram - Coupe Wiring Diagram - Sedan ...

BCM (Body control module)
Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH fr ...

Other materials:

Fuel pressure
Inspection FUEL PRESSURE RELEASE 1. Turn ignition switch ON. 2. Perform “FUEL PRESSURE RELEASE” in “WORK SUPPORT” mode with CONSULT-III. 3. Start engine. 4. After engine stalls, crank it 2 or 3 times to release all fuel pressure. 5. Turn ignition switch OFF. 1. Remove fuel ...

Warning systems switch (if so equipped)
The warning systems switch is used to temporarily turn off the warning systems (Lane Departure Warning (LDW) and Blind SpotWarning (BSW) systems) that are activated using the settings menu in the vehicle information display. When the warning systems switch is turned off, the indicator 1 on ...

TCM branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). - TCM - Harnes ...