Nissan Altima (L32) 2007-2012 Service Manual ≻ Power distribution system ≻ ECU diagnosis

Nissan Altima (L32) 2007-2012 Service Manual: ECU diagnosis

Push-button ignition switch position indicator

Description The switch that changes the power supply position. BCM maintains the power supply position status. BCM changes the power supply position with the operation of the push-button ign ...

BCM (Body control module)

Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH ...

Other materials:

Heated steering wheel switch (if so equipped)
Push the heated steering wheel switch to warm the steering wheel after the ignition switch is placed in the ON position. The indicator light will come on. If the surface temperature of the steering wheel is below 68ºF (20ºC), the system will heat the steering wheel and cycle off and on to mainta ...

MOD system operation
The MOD system will turn on automatically under the following conditions: When the shift lever is in the R (Reverse) position. When the CAMERA button is pressed to activate the camera view on the display. When vehicle speed decreases below approximately 6 mph (10 km/h) and the camera screen ...

RAB system operation
For vehicles with the 7 inch (18 cm) display RAB system warning light and RAB system warning indicator Steering-wheel-mounted controls (left side) Center display When the shift lever is in the R (Reverse) position and the vehicle speed is less than approximately 9 mph (15 km/h), the RAB syst ...