Nissan Altima 2007-2012 Service Manual: Evap vapor lines

Inspection

1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration.

2. Inspect fuel tank filler cap vacuum relief valve for clogging, sticking, etc.

    Spark plug
    Removal and Installation 1. Ignition coil 2. Spark plug 3. Rocker cover REMOVAL 1. Remove the ignition coil. Refer to EM-35, "Removal and Installation". 2. Remove the spark plug w ...

    Other materials:

    Water pump
    Removal and Installation 1. Water pump 2. O-rings WARNING: Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. CAUTION: • When removing water pump assembly, be careful not to get coolant on drive belt. ...

    Oil seal
    Removal and Installation of Valve Oil Seal REMOVAL 1. Remove camshaft. Refer to EM-41, "Removal and Installation". 2. Remove valve lifter. Refer to EM-41, "Removal and Installation". 3. Rotate crankshaft, and set piston whose oil seal is to removed to top dead center. ...

    B2108 steering lock relay
    Description The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication. IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2108 is displayed with DTC U1000, first perf ...