Nissan Altima 2007-2012 Service Manual: Evap vapor lines

 Inspection

1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration.

2. Inspect fuel tank filler cap vacuum relief valve for clogging, sticking, etc.

    Spark plug
    Removal and Installation 1. Ignition coil 2. Spark plug 3. Rocker cover RH 4. Rocker cover LH REMOVAL 1. Remove the ignition coil. Refer to EM-145, "Removal and Installation LH" a ...

    Other materials:

    Component diagnosis
    Wiring Diagram - Coupe Wiring Diagram - Sedan ...

    B210D starter relay
    Description Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210D is display ...

    Warning lamp
    Description • Warning lamp is built in combination meter. • Intelligent Key system malfunction is reported to the driver by the warning lamp illumination. Component Function Check 1.CHECK FUNCTION 1. Perform “INDICATOR” in the “Active Test” mode with CONSULT-III. 2. Check wa ...