Nissan Altima 2007-2012 Service Manual: Function diagnosis

Intermittents incident
Inspection Procedure INTERMITTENT TROUBLE An intermittent incident may have occured in the past but is not being detected currently. This DTC will not be detected on SELF DIAG [CURRENT], but may ...

SRS air bag system
SRS Configuration The air bag deploys if the air bag diagnosis sensor unit is activated while the ignition switch is in the ON or START position. The collision modes for which supplemental r ...

Other materials:

Warning lamp
Description • Warning lamp is built in combination meter. • Intelligent Key system malfunction is reported to the driver by the warning lamp illumination. Component Function Check 1.CHECK FUNCTION 1. Perform “INDICATOR” in the “Active Test” mode with CONSULT-III. 2. Check wa ...

Diagnosis and repair workflow
Work Flow INTRODUCTION The TCM receives a signal from the vehicle speed sensor, PNP switch and provides shift control or lock-up control via CVT solenoid valves. The TCM also communicates with the ECM by means of a signal sent from sensing elements used with the OBD-related parts of the C ...

Can communication circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect all the unit connectors on CAN communication system. 4. Check terminals and connectors for damage, bend and loose con ...