Nissan Altima 2007-2012 Service Manual: Function diagnosis

Inspection and adjustment
ECM RE-COMMUNICATING FUNCTION  Description Performing following procedure can automatically perform re-communication of ECM and BCM, but only when the ECM has been replaced with a new one ( ...

Engine start function
System Diagram System Description INPUT/OUTPUT SIGNAL CHART SYSTEM DESCRIPTION • The engine start function of remote keyless entry system is a system that makes it possible to start and ...

Other materials:

ABS branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the ABS actuator and electric unit (control unit) for damage, bend and loose connection (unit ...

S Terminal circuit
Description The output voltage of the generator is controlled by the IC regulator at terminal “3” (S) detecting the input voltage. Terminal “3” circuit detects the battery voltage to adjust the generator output voltage with the IC regulator. Diagnosis Procedure 1.CHECK VOLTAGE REG ...

Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal Transceiver button, complete the following: 1. Press and hold the desired HomeLink® button. DO NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink® button, proceed with “Programming HomeL ...