Nissan Altima 2007-2012 Service Manual: Fuse, fusible link and relay box

Terminal Arrangement

    Fuse block - junction box (J/B)
    Terminal Arrangement ...

    IPDM E/R (Intelligent power distribution module engine room)
    Fuse, Connector and Terminal Arrangement ...

    Other materials:

    P0447 evap canister vent control valve
    Description The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the ca ...

    Vehicle Dynamic Control (VDC) off switch
    The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the flo ...

    Front power window switch
    Description • BCM supplies power. • Front power window motor RH will be operated if power window and door lock/unlock switch RH is operated. Component Function Check Power Window And Door Lock/unlock Switch RH 1. CHECK POWER WINDOW MOTOR FUNCTION Does front power window motor operate w ...