Nissan Altima 2007-2012 Service Manual: Inspection and adjustment

Diagnosis and repair workflow
Work Flow OVERALL SEQUENCE DETAILED FLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/m ...

Additional service when replacing control unit
Description MEMORY RESET PROCEDURE 1. Please observe the following instructions at confirming the sunroof operation. NOTE: Do not disconnect the electronic power while the sunroof is operatin ...

Other materials:

Satellite radio antenna
Removal and Installation REMOVAL 1. Lower the headliner at the rear. Refer to INT-20, "Removal and Installation" (coupe) and INT-42, "Removal and Installation" (sedan). 2. Remove the satellite radio antenna nut (A), then disconnect the satellite radio antenna connector ( ...

Accelerator pedal released position learning
 Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal p ...

Evap leak check
Inspection CAUTION: • Do not use compressed air or a high pressure pump. • Do not exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system. NOTE: • Do not start engine. • Improper installation of EVAP service port adapter [commercial service tool: (J-41413-OBD)] to the ...