Nissan Altima 2007-2012 Service Manual: Intelligent key system/engine start function symptoms

Symptom Table

Engine cannot be started with all Intelligent Keys.

CAUTION: • Follow Trouble Diagnosis Flowchart referring to “SEC-209, "Work Flow"”. Determine malfunctioning condition before performing this diagnosis.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis.

• Check systems shown in the “Diagnosis/service procedure” column in this order.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS) • Engine start function is ON when setting on CONSULT-III.

• Use Intelligent Key with registered Intelligent Key ID.

• One or more of Intelligent Keys with registered Intelligent Key ID is in the passenger compartment.

    Symptom diagnosis
    ...

    Vehicle security system symptoms
    Symptom Table *: Check that the system is in the armed phase. ...

    Other materials:

    B2191, P1615 Difference of key
    Description Performs ID verification through BCM and keyfob when push-button ignition switch is pressed. Prohibits the release of steering lock or start of engine when an unregistered ID of keyfob is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRM ...

    Camera image signal circuit (camera control unit to av control unit)
    Description Rear view camera image signals are transmitted from the rear view camera control unit to the AV control unit using the image signal circuits. Diagnosis Procedure 1.CHECK CAMERA IMAGE SIGNAL CIRCUIT CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect rear view camera control ...

    Basic inspection
    DIAGNOSIS AND REPAIR WORK FLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagnostic Work Sheet”. (Refer ...