Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance
Function diagnosis
NOISE, VIBRATION, AND HARSHNESS
(NVH) TROUBLESHOOTING
NVH Troubleshooting - Engine Noise
1. Camshaft bearing noise
2. Piston pin noise
3. Piston slap noise
4. Main bearing noise
5. Connecting ...
Spark plug
Removal and Installation
1. Ignition coil
2. Spark plug
3. Rocker cover RH
4. Rocker cover LH
REMOVAL
1. Remove the ignition coil. Refer to EM-145, "Removal and Installation LH"
an ...
Other materials:
B260F engine status
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-235, "DTC Logic".
• If DTC B260F is displayed w ...
B2013 ID discord, immu-strg
Description
BCM performs the ID verification with the steering lock unit and releases the
steering lock if both BCM and
steering lock unit ID are same. BCM starts the communication with the steering
lock unit when Intelligent Key
is carried into the passenger compartment and the push-button ...
B2616 ignition relay circuit
Description
BCM controls the various electrical components and simultaneously supplies
power according to the power
supply position.
BCM checks the power supply position internally.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1. PERFORM DTC CONFIRMATION PROCEDURE
1. Turn i ...