Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

Preparation
Special Service Tools The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here. Commercial Service Tools ...

Clutch pedal
Inspection and Adjustment 1. Check to see if the master cylinder rod end moves freely. It should not be bound by the clutch pedal. • If the rod end does not move freely, remove the rod end and ...

Other materials:

Parking lamp circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the tail lamp relay based on inputs from the BCM over the CAN communication lines. When the tail lamp relay is energized, power flows through fuses 46 and 47, located in the IPDM E/R. Power then flows to th ...

Power supply and ground circuit
Description • EPS system functions by ignition power supply. Diagnosis Procedure 1.CHECK POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect power steering control unit harness connector. 3. Check voltage between power steering control unit harness connector M59 terminal 3 and ...

B2193, P1612 chain of ecm-immu
Description BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK. ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON. DTC Logic DTC DETECTION LOGI ...