Nissan Altima 2007-2012 Service Manual: On-vehicle repair

On-vehicle maintenance
ROAD WHEEL Inspection ALUMINUM WHEEL 1. Check tires for wear and improper inflation. 2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runou ...

Tire pressure receiver
Removal and Installation REMOVAL 1. Remove instrument lower cover (LH). Refer to IP-11, "Exploded View". 2. Locate tire pressure receiver (1) to the right of the steering column (2) an ...

Other materials:

ABS branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the ABS actuator and electric unit (control unit) for damage, bend and loose connection (unit ...

Conditions the remote start will not work
The remote start will not operate if any of the following conditions are present: ● The ignition switch is placed in the ON position. ● The hood is not securely closed. ● The hazard warning lights are on. ● The I–Key Indicator Light remains solid in the vehicle inform ...

Evap leak check
Inspection CAUTION: • Never use compressed air or a high pressure pump. • Never exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system. NOTE: • Do not start engine. • Improper installation of EVAP service port adapter (commercial service tool) to the EVAP service po ...