Nissan Altima 2007-2012 Service Manual: On-vehicle repair

Oil filter
Removal and Installation REMOVAL 1. Remove the oil filter using Tool. Tool number : KV10115801 (J-38956) WARNING: • Be careful not to get burned, the engine and engine oil may be hot. CAUTION ...

Oil pump
Removal and Installation • The oil pump is part of the front cover. For removal and installation of the oil pump, it is necessary to remove and install the front cover. Refer to EM-52, "Re ...

Other materials:

IPDM E/R (Intelligent power distribution module engine room)
Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram — Coupe Fail Safe CAN COMMUNICATION CONTROL When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN communication rec ...

Body side trim
Exploded View 1. Front pillar finisher 2. Front body side welt 3. Front kicking plate 4. Front sill cover 5. Rear lower finisher 6. Upper pillar finisher 7. Rear pillar finisher Removal and Installation CAUTION: • Wrap the tip of flat-bladed screwdriver with a cloth when removing ...

P0715 input speed sensor (pri speed sensor)
Description The input speed sensor (primary speed sensor) detects the primary pulley revolution speed and sends a signal to the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION PROCEDURE” has be ...