Nissan Altima Owners Manual: Personal Lights
Rear personal lights
To turn the rear personal lights on, press the switch. To turn them off, press the switch again.
P0447 evap canister vent control
Description The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the ca ...
B261A push-button ignition switch
Description BCM transmits the change in the power supply position with the push-button ignition switch to IPDM E/R via the CAN communication line. IPDM E/R transmits the power supply position status via CAN communication line to BCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCED ...
Description The heated oxygen sensor 2, after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Even if switching characteristics of the air fuel ratio (A/F) sensor 1 are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal from th ...