Nissan Altima 2007-2012 Service Manual: Power window lock switch does not function

Diagnosis Procedure


Replace main power window and door lock/unlock switch.

Refer to PWC-411, "Removal and Installation". After that, PWC-307, "POWER WINDOW MAIN SWITCH : Special Repair Requirement".

Is the inspection result normal? YES >> Inspection end.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Keyless power window down does not operate
    Diagnosis Procedure 1. CHECK INTELLIGENT KEY FUNCTION Check Intelligent Key function. Refer to DLK-340, "Component Function Check". Is the inspection result normal? YES >> Ch ...

    On-vehicle maintenance
    PRE-INSPECTION FOR DIAGNOSTIC Basic Inspection 1.INSPECTION START 1. Check the service history. 2. Check the following parts. • Fuse/circuit breaker blown. • Poor connection, open or s ...

    Other materials:

    Vehicle load capacity
    Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label. To get “the combined weight of ...

    Ambient sensor signal circuit
    Description Transmits the ambient sensor signal to the combination meter. Component Function Check 1.COMBINATION METER INPUT SIGNAL 1. Select “METER/M&A” on CONSULT-III. 2. Using “OUTSIDE TEMP” on “DATA MONITOR”, compare the value of DATA MONITOR with temperature display ...

    Electric ignition system
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: This signal is sent to the ECM through CAN communication line. *2: ECM determines the start signal status by the signals of engine speed and battery voltage. SYSTEM DESCRIPTION Firing order: 1 - 3 - 4 - 2 The ignition t ...