Nissan Altima 2007-2012 Service Manual: Power window motor

Rear power window switch
Description • BCM supplies power. • Rear power window motor will be operated if rear power window switch is operated. Rear power window switch.  Component Function Check Rear Power ...

Driver side
Description Door glass moves UP/DOWN by receiving the signal from power window main switch. Component Function Check 1. CHECK POWER WINDOW MOTOR CIRCUIT Does front power window motor LH operate ...

Other materials:

B2192, P1611 ID discord, immu-ecm
Description BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK. ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON. DTC Logic DTC DETECTION LOGIC ...

B210a steering lock condition switch
Description There are 2 switches in the electronic steering column lock. IPDM E/R compares those 2 switches conditions to judge the present steering status and transmit the result to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210A is displayed with DTC U10 ...

Stall test
Inspection and Judgment INSPECTION 1. Inspect the amount of engine oil. Replenish the engine oil if necessary. 2. Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80°C (122 to 176°F). Inspect the amount of CVT fluid. Replenish if necessary. 3. ...