Nissan Altima 2007-2012 Service Manual: Precaution
HANDLING PRECAUTIONS FOR PLASTICS
Precautions For Plastics
1. When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.
2. Plastic parts should be repaired and painted using methods suiting the materials, characteristics.
LOCATION OF PLASTIC PARTS
Features of new model
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
M= Metallic, S= Solid, 2S= Solid and Clear, 2P= 2-stage Pearl, 3P= 3-Stage
pearl, PM=Pearl metallic, Black is solvent based, all others
are ...
Other materials:
B2601 shift position
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• P position signal from IPDM E/R (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-4 ...
P0643 Sensor power supply
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn
ignition switch OFF and wait at
least 10 seconds before conducting the next test.
TESTING CONDITION:
Before performing the following proced ...
Fluorescent leak detector
Checking System for Leaks Using the Fluorescent
Leak Detector
1. Check A/C system for leaks using the UV lamp and safety goggles (J-42220)
in a low sunlight area (area
without windows preferable). Illuminate all components, fittings and lines. The
dye will appear as a bright
green/yellow ar ...