Nissan Altima 2007-2012 Service Manual: Precaution

HANDLING PRECAUTIONS FOR PLASTICS

Precautions For Plastics

1. When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.

2. Plastic parts should be repaired and painted using methods suiting the materials, characteristics.

LOCATION OF PLASTIC PARTS

    Features of new model
    BODY EXTERIOR PAINT COLOR Body Exterior Paint Color M = Metallic, S = Solid, 2S = Solid and Clear, 2P = 2-stage Pearl, 3P = 3-Stage pearl, PM = Pearl metallic, Black is solvent based, all othe ...

    Other materials:

    P0603 ECM Power supply
    Description Battery voltage is supplied to the ECM even when the ignition switch is turned OFF for the ECM memory function of the DTC memory, the air-fuel ratio feedback compensation value memory, the idle air volume learning value memory, etc. DTC Logic DTC DETECTION LOGIC DTC CONFIRMAT ...

    Automatic speed control device (ASCD)
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART *: This signal is sent to the ECM through CAN communication line BASIC ASCD SYSTEM Refer to Owner's Manual for ASCD operating instructions. Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at predetermin ...

    Refrigeration system
    Refrigerant Cycle Refrigerant flow The refrigerant flows in the standard pattern, that is, through the compressor, the condenser with liquid tank, through the evaporator, and back to the compressor. The refrigerant evaporation through the evaporator coil is controlled by an externally equal ...