Nissan Altima 2007-2012 Service Manual: Preparation
Special Service Tool
The actual shapes of the Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
Precaution
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER ...
On-vehicle maintenance
FRONT SUSPENSION ASSEMBLY
Inspection and Adjustment
INSPECTION
Make sure the mounting conditions (looseness, back lash) of each component
and component conditions
(wear, damage) are normal.
LOW ...
Other materials:
B2608 starter relay
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned
ON by the BCM when the ignition
switch is in START position. IPDM E/R transmits the starter relay ON signal to
BCM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2608 is displaye ...
P2118 throttle control motor
Description
The throttle control motor is operated by the ECM and it opens and closes the
throttle valve.
The current opening angle of the throttle valve is detected by the throttle
position sensor and it provides feedback
to the ECM to control the throttle control motor to make the throttl ...
Rear timing chain case
Component
1. Timing chain tensioner
2. Internal chain guide
3. Timing chain tensioner
4. Camshaft sprocket (EXH)
5. Timing chain (secondary)
6. Timing chain (primary)
7. Camshaft sprocket (INT)
8. Camshaft sprocket (INT)
9. Timing chain (secondary)
10. Camshaft sprocket (EXH)
11. Slack ...