Other materials:

Anti-pinch system does not operate normally (passenger side)
Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the ma ...

Drive belts
Checking Drive Belts WARNING: Inspect the drive belt only when the engine is stopped. • Make sure that the stamp mark of drive belt auto-tensioner is within the usable range. NOTE: • Check the drive belt auto-tensioner indicator (notch) when the engine is cold. • When the new d ...

Rear combination lamp
Bulb Replacement Removal 1. Remove the rear combination lamp. Refer to EXL-260, "Removal and Installation". 2. Turn the rear turn signal lamp bulb socket counterclockwise and remove it. 3. Remove the rear turn signal lamp bulb. Installation Installation is in the reverse order ...