Nissan Altima 2007-2012 Service Manual: Preparation

Special Service Tool

The actual shape of the Kent-Moore tools may differ from those tools illustrated here.

Commercial Service Tool

    Precaution
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

    Function diagnosis
    LUBRICATION SYSTEM Lubrication Circuit Schematic 1. Oil pan 2. Oil strainer 3. Oil pump 4. Regulator valve 5. Oil filter 6. Relief valve (Built in oil filter) 7. Oil cooler 8. Bypass 9. ...

    Other materials:

    Line pressure test
    Inspection and Judgment INSPECTION Line Pressure Test Port Line Pressure Test Procedure 1. Inspect the amount of engine oil and replenish if necessary. 2. Drive the car for about 10 minutes to warm it up so that the CVT fluid reaches in the range of 50 to 80°C (122 to 176°F), then ins ...

    P0125 ECT Sensor
    Description The engine coolant temperature sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change i ...

    P0703 stop lamp switch
    Description BCM detects ON/OFF state of the stop lamp switch and transmits the data to the TCM via CAN communication by converting the data to a signal. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION ...