Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)

Oil Pressure

Oil Pump


Oil Pump

Regulator Valve


Regulator Valve

Oil Capacity


Oil Capacity

Engine lubrication system VQ35DE


    Oil cooler
    Removal and Installation 1. Oil pressure switch 2. Oil cooler 3. Gasket 4. Water hose (outlet) 5. Water hose (inlet) A. To water control valve housing B. To heater pipe assembly C. Hose clam ...

    Other materials:

    B2606 steering lock relay
    Description The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication. IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2606 is displayed with DTC U1000, first ...

    Intake manifold
    Removal and Installation 1. Intake manifold 2. Rubber seal 3. Intake manifold adapter 4. Gasket 5. Electric throttle control actuator 6. Rubber seal 7. PCV hose 8. EVAP canister purge volume control solenoid valve 9. EVAP hose REMOVAL WARNING: To avoid the danger of being scalded, nev ...

    P0101 maf sensor
    Description The mass air flow sensor (1) is placed in the stream of intake air. It measures the intake flow rate by measuring a part of the entire intake flow. The mass air flow sensor controls the temperature of the hot wire to a certain amount. The heat generated by the hot wire is reduced as ...