Nissan Altima 2007-2012 Service Manual: Subwoofer

Components

1. Subwoofer speaker

2. Spacer

A. Screws

Removal and Installation

REMOVAL

1. Remove the rear parcel shelf finisher. Refer to INT-17, "Removal and Installation" (coupe) and INT-38, "Removal and Installation" (sedan).

2. Remove the trunk front finisher. Refer to INT-23, "Removal and Installation" (coupe) and INT-46, "Removal and Installation" (sedan).

3. Remove the subwoofer speaker screws from the top, disconnect the subwoofer speaker harness connector and remove the subwoofer speaker and spacer assembly.

4. Remove the spacer screws and remove the subwoofer speaker from the spacer.

INSTALLATION

Installation is in the reverse order of removal.

    Rear tweeter
    Removal and Installation - Coupe REMOVAL 1. Remove the rear parcel shelf finisher. Refer to INT-17, "Removal and Installation". 2. Remove the rear tweeter speaker screws (A) and remov ...

    Satellite radio antenna
    Removal and Installation REMOVAL 1. Lower the headliner at the rear. Refer to INT-20, "Removal and Installation" (coupe) and INT-42, "Removal and Installation" (sedan). 2. ...

    Other materials:

    B210C starter control relay
    Description Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position and the steering is locked or unlocked. It is installed in parallel with the starter relay. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210C is displayed with DTC U10 ...

    BCM (Body control module)
    Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH front window anti-pinch 4: With Intelligent Key 5: Without Intelligent Key Wiring Diagram-Coupe ...

    Camshaft
    Removal and Installation 1. Camshaft bracket (No.1) 2. Washer 3. Front cover (partial view) 4. Chain guide 5. Chain tensioner 6. O-ring(s) 7. Chain tensioner spring 8. Chain tensioner plunger 9. IVT control solenoid valve 10. IVT control cover 11. Camshaft sprocket (EXH) 12. Camshaft ...