Nissan Altima 2007-2012 Service Manual: Vehicle security indicator

Description

• Vehicle security indicator is built in combination meter.

• NVIS (Nissan Vehicle Immobilizer System-NATS) and vehicle security system conditions are indicated by blink or illumination of vehicle security indicator.

Component Function Check

1.CHECK FUNCTION

1. Perform “THEFT IND” in the “ACTIVE TEST” mode with CONSULT-III.

2. Check vehicle security indicator operation.

Is the inspection result normal? YES >> Inspection End.

NO >> Refer to SEC-323, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK COMBINATION METER

Check combination meter. Refer to MWI-4, "Work Flow".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace the malfunctioning parts.

2.CHECK INTERMITTENT INCIDENT

Refer to GI-42, "Intermittent Incident".

>> Inspection End.

    Warning lamp
    Description • Warning lamp is built in combination meter. • Intelligent Key system malfunction is reported to the driver by the warning lamp illumination. Component Function Check 1.CHECK ...

    Other materials:

    Camera on signal circuit (coupe)
    Description When the selector lever is placed in the R position, the rear view camera control unit sends a camera ON signal to the rear view camera. Diagnosis Procedure 1.CHECK CAMERA ON SIGNAL CIRCUIT CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect rear view camera control unit con ...

    Multiport fuel injection system
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: This sensor is not used to control the engine system under normal conditions. *2: This signal is sent to the ECM through CAN communication line. *3: ECM determines the start signal status by the signals of engine speed and ...

    Push-button ignition switch position indicator
    Description The switch that changes the power supply position. BCM maintains the power supply position status. BCM changes the power supply position with the operation of the push-button ignition switch. Component Function Check 1. CHECK FUNCTION 1. Check push-button ignition switch ...